Slide in the use of plastic sheeting or coarse cover to prevent ultraviolet radiation aging, fading, crack, etc. to the cracked slide Groove section should be repaired, if necessary, replacement, slide interface uneven smooth, inverted convex Taiwan or leakage should be dealt with in a timely manner. The maintenance of the waterway clean: Slide Waxing: The annual glass steel should at least use high-quality wax waxing two times. After closing the park, you can wax the slide. Before waxing, black spots and faded places with good polishing agents are polished to the original gloss. Waxing prevents fading of the channel from prolonged exposure to ultraviolet light. The longer the surface, the more durable the wax will be.
Need to be aware of the use of polishing tools, must be very heart, do not make the surface overheating, polishing overheating will cause the surface of the water channel sand-like particles, causing blisters and stripes, so you need to repaint. Repair: Normal use may also lead to debris and cracks in fiberglass waterways. Repair must be repaired with a qualified glass adhesive.
For example, the resin and plastic garments used by the swimming cleaning Water amusement park Equipment company are imported raw materials. If the water park facilities are not used in winter, all water should be drained. Because the water in the winter cold is to freeze, after icing volume will increase, volume ratio is 1:1:1, large volume to the swimming pool and its equipment, pipelines have damage. If the water park facilities are used in winter, measures should be taken to prevent freezing and not to allow the temperature to be less than 0 degrees. The cheapest way to do this is to: screw the mixer, stirring the water regularly to keep the water from freezing.